HONDA CRF50F - Manual (Page 35)

27
Is Your Motorcycle Ready to Ride?
Before Riding
Pre-ride Inspection
Fuel
Tires
Spokes &
Rims
Engine Oil
Leaks
Spark Plug
& Cap
Nuts &
Bolts
Cables
Drive Chain
Check the following items before you get on
the motorcycle:
Use a gauge to check the air
pressure. Adjust if needed. Also
look for signs of damage or
excessive wear (page
).
Make sure the spokes are tight.
Also check the rims for damage
(page
).
Check the level and add oil if
needed (page
).
Look under the motorcycle for
signs of leaking fluids (fuel,
engine oil).
Check the level and add fuel
(page
) if needed. Also make
sure the fuel fill cap is securely
fastened.
Check for looseness
(page
).
Use a wrench to make sure all
accessible nuts, bolts, and
fasteners are tight.
Check the cable housings for
wear. Check the fittings for
looseness. Replace or tighten as
needed.
Check the condition and slack.
Adjust and lubricate if needed.
Also check the chain slider for
wear and replace if needed
(page
). 96
91
64
101
58
79