Note – Sony RM-Y130 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
I’ress the
CODE SET
button.
The TV and CABLE indicators on
the Remote commander flash,
indicating that the Remote
Commander is in preset mode.
CODE SET
CD
Press the
FUNCTION
button
(TV
function
-
cable
or
CABLE)
for the component you're
setting up.
To set up your VCR or MDP, set the
slide switch
inside the Remote
Commander to any position.
VTR1 2 3MDP
5
Enter the component's code number.
For example, if you're entering the
code for a Philips VCR, you would
press
3,1
and
0.
©O®
6
Press the
ENTER
button to store the
code number in the Remote
Commander's memory.
ENTER
o
7
Go to "Step 2: Checking if the Code
Number Works" on page 8 to finish
setting up.
Note
■ If more than 10 seconds elapse after you press a button,
preset mode is cancelled automatically.