If the remote commander doesn't seem to be, Working, If the remote commander is working properly – Sony RM-Y130 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
step 3: Checking If the Code Number Works
Aim the Remote Commander at the
component and press the
POWER
button that corresponds to your
component. The component should
turn on.
--------- POWER-
CABLE TV
CDCD
POWER
CD
2
When the component turns on.
CH
check that the Remote Commander
is operating the other functions of
your component. Press the
CH +/-
'Wj
buttons.
PAGE^
if the Remote Commander Doesn't Seem to Be
Working ...
■ First, try repeating these setup procedures using the other
codes listed for your component (see page 16).
■ If — after trying all the codes listed for your component —
you still cannot get the Remote Commander to work
properly, try the learning function described under "Setting
Up a Non-preprogrammed Component" on page 9.
If the Remote Commander is Working Properly ...
■ You're finished setting up the Remote Commander for this
component.
■ You'll need to complete these procedures for each
component you plan to use with the Remote Commander.
8