CMA Dishmachines REV 2.05 CMA-180 - Manual (Page 12)

NOTE: Rinse water temperature must be observed during the rinse cycle.
10. Check all water and drain fittings for leaks.
11. Install the wall chart and instruct the machine operator on the proper cleaning and
operation of the CMA-180.
NOTE: Booster Heater
Booster heater is shipped on the dishmachine empty to prevent freezing. When the
machine is powered up for the first time, the booster heater must be filled immediately
to prevent damage to the heating element. See Section 2.2.6 (4d.)
MODEL CMA-180 INSTALLATION & OPERATION Rev. 2.05 Page 11