CMA Dishmachines REV 2.05 CMA-180 - Manual (Page 9)

2.2.4. Exhaust Fan Control Kit p/n 17528.00 Instructions
1. Connect terminal #1 on timer block (Red) to heater contactor terminal marked L3
2. Connect terminal #3 on timer block (Blue) to heater contactor terminal marked L1
3. Connect terminal #2 on timer block (Red/Black) to fan contactor coil terminal.
4. Connect terminal #3 on timer block (Blue) to other fan contactor coil terminal
5. Connect terminal # 3 on timer block (Blue) to fifth cam top terminal on timer assembly.
6. Connect terminal #6 on timer block (Blue) to fifth cam middle terminal on timer assembly.
7. Connect power source of 220 Vac or 110 Vac to L1 and L2 (N) on fan control contactor.
8. Connect exhaust fan motor to T1 and T2 on other side of fan control contactor.
MODEL CMA-180 INSTALLATION & OPERATION Rev. 2.05 Page 8