Compaq 1600XL - Manual (Page 116)

30 R EMOVAL S EQUENCE P RESARIO N OTEBOOK M AINTENANCE AND S ERVICE G UIDE 1600XL S ERIES
Presario 1600XL Series
Model 1600T, 1600-XL140, 1600-XL141, 1600-XL142, 1600-XL143, 1600-XL144,
1600-XL146, 1600-XL147, 1600-XL150 XL156, XL157, XL255, XL256, XL257, and XL258
Removing the Processor
To remove the processor, complete the following steps:
1. Prepare the Notebook for disassembly ( pg 12 ).
2. Remove the Palmrest Cover with TouchPad ( pg 15 ).
3. Remove the keyboard ( pg 18 ).
4. Remove the Heatspreader ( pg 24 ).
5. Place the tip of a standard screwdriver in the "Open" slot, shift it to the right, and lift
the processor from the chassis.
To replace the processor:
1. Fully align the processor connector with the system board connector.
2. Press down carefully on the processor directly over the connectors to seat the
processor.
3. Reassemble the remaining subassemblies by reversing their removal procedures.