Before you use your receiver, There's no sound from a specific component, No sound is heard from one of the front speakers – Sony STR-DA30ES User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Before You Use Your Receiver
There's no sound from a specific component.
Check that the component is connected correctly to
the audio input jacks for that component.
Check that the cord(s) used for the connection is
(are) fully inserted into the jacks on both the
receiver and the component.
No sound is heard from one of the front
speakers.
Check that the BALANCE control is set at center
position (see "[§] BALANCE control" on page 23).
Connect a pair of headphones to the PHONES jack
and set the SPEAKERS selector to OFF to verify
that sound is output from the headphones (see
"[
8
]
SPEAKERS selector" and "PHONES jack" on page
23).
if only one channel is output from the headphones,
the component may not be connected to the
receiver correctly, Check that all the cords are fully
inserted into the jacks on both the receiver and the
component.
If both channels are output from the headphones,
the front speaker may not be connected to the
receiver correctly. Check the connection of the
front speaker which is not outputting any sound.
If you encounter a problem that is not included above, see
"Troubleshooting" on page 44.
70