Required cords, 5’ с – Sony STR-DA30ES User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connect the digital output jack of your MD or DAT deck
to the receiver's digital input jack and connect the digital
input jack of your MD or DAT deck to the receiver's
digital output jack. These connections allow you to make
digital recordings of CDs and TV broadcasts.
Required cords
Optical digital cords (not supplied)
Black
tsSii
SSl iiiirr> Black
Audio cords (not supplied)
X
О
о
зг
5’
с
■ о
ф
п
о
3
Т5
О
3
ф
3
Notes
• Please note that you cannot make a digital recording of a digital multi channel surround signal.
• This unit is compatible with 32 kHz, 44.1 kHz, and 48 kHz sampling frequencies. It is not compatible with 96 kHz sampling frequencies.
• It is not possible to record analog signals to TAPE and VIDEO with only digital connections. Be sure to make both digital and analog
connections to your digital components.