Sony STR-DA30ES - Manual (Page 8)

Digital Component Hookups
Connect the digital output jacks oi vour U\d) pla\ cr aiid
DBS tuner (etc.) to the receiver's digital input jacks t(.>
bring the multi channel surround sound of a mo\ ie
theater into vour home. To enjoy full effect of multi
channel surround sound, five speakers (two front
speakers, two rear speakers, and a center speaker) and a
subwoofer are required. You can also connect an LD
plaver with aiTRF OUT jack \ ia an RT deiruxlulator, like
the Sony MOD-RFl (not supplied).
Required cords
Optical digital cords (not supplied)
Black dfi ........................ X HtJ Black
Coaxial digital cord (not supplied)
Yellow «di llllin= : =nilill 3= Yellow
Audio/video cords (not supplied)
When connecting a cord, be sure to match the color-coded [nns to
the appropriate jacks on the components.
Example of LD player connected via an RF demodulator
Please note that you cannot connect an LD pUiyer's AC-3 RF OUT jack directly to this unit's digital input jacks. You must
first convert the RF signal to either an optical or coaxial digital signal. Connect the LD player to the RT demodulator, then
connect the RF demodulator's optical or coaxial digital output to this unit's OPTICAL TN or COAXIAL DVD/LFJ) IN jack.
Refer to the instruction manual supplied with your RF Demodulator for details on AC-3 RF hookups.
Note
When making connections as shown above, be sure to set INPUT MODE (!”3l on page 23) manually. I'his unit may not operate correctly if
INPU I MODE is set to "AUTCY"