Changing a stored name and/or phone number, Sony, Pgm erase t234^67 – Sony SPP-A967 User Manual
Page 12: Erasing a memory location, Dial pgm erase 123^67, Erase no yes 1234567
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
4 Press CvoL/PGM).
"ENTER NUMBER" appears.
Phone Directory (continued)
Enter the phone number.
You can enter up to 16 digits, including a tone
and a pause, each of which is counted as one digit.
SONY o,v
12345|B,:
O Press (VOL/PGM).
You hear a long confirmation beep, and the name and the number are
stored. The display goes off.
Notes
• If you try to save a 51st phone number, you will hear five short error beeps
and "MEMORY FULL" will be displayed. You cannot store the phone
number. To store another phone number, erase one of the stored phone
numbers (see page 23).
• Do not allow more than 20 seconds to elapse between each step of the
procedure.
Tips
• If you haw entered a wrong name or number in step 3 or 5, turn Jog Dial
doivn to erase it. Then enter the correct name or number.
• You may pre.ss Jog Dial instead of CVOLT
p
'GM') in steps 4 and 6.
• To store a number to be dialed via PBX, follow the steps on page 20 when
entering a phone number.
Changing a stored name and/or phone
number
1
Display the name and phone number vou want
to change by following steps 1 and 2 on page 24.
2
Press Jog Dial.
SONY
1234567
.¿PGM ERASE
T234^67
220
Telephone Features
S0№
1234657
3
Turn jog Dial up to make "PGM" flash and press
Jog Dial.
The cursor flashes at the last character of the
name.
4
Turn Jog Dial down to erase the characters and
enter the new name.
If you want to change only the number, skip this
step.
5
Press Jog dial.
The cursor flashes at the last digit of the phone
number.
6
Turn Jog Dial down to erase the number and enter the new
number.
If vou don't want to change the number, skip this step.
7
Press Jog Dial.
You hear a long confirmation beep and the name and/or the
number is changed.
SMITH a,,
12345ia,:
Erasing a memory location
1
Display the name and phone number you want
to erase bv following steps 1 and 2 on page 24.
2
Press Jog Dial.
3
Turn log Dial up to make "ERASE" flash and
press Jog Dial.
SONY
1234567
DIAL PGM ERASE
123^67
ERASE NO YES
1234567
4
T urn log Dial up to make "h'ES" flash, then press Jog Dial,
h'ou hear a Icmg contirmation beep and the memory location
rased.
continued
I'eleph'O^'ie Fe.-itures