Sony MZ-R55 - Manual (Page 11)

Recording with digital
input (optical cable
required)
Connect to a digital source using an
optical cable (POC-5B or POC-SAB, not
supplied) to make digital recordings.
Digital recording is possible even from
digital equipment with different sampling
rates, such as a DAT deck or a BS tuner,
using the built-in sampling rate converter.
CD player, MD
Portable CD
player, digital
amplifier, etc.
player, etc.
4
Optical
plug
4
1 POC-5Betc.
(not supplied)
POC-5AB etc.
(not supplied)
Optical
mini­
plug
to LINE IN
(OPTICAL)
I
Insert a recordable MD and start
recording.
For recording operations, see
“Recording an MD right away !”
(page 6). To record from a portable
CD player, set the CD player to pause
and then start recording.
LINE IN (OPTICAL) jack is for both
digital and analog input
The recorder automatically recognizes the
type of line cable and switches to digital or
analog input.
Notes
•You can make a digital recording only from an
opticcd type output.
•When recording from a portable CD player,
play it on AC power and disable the anti-skip
function (such as ESP*).
• Digital output may be disabled on some
portable CD players when the player is not run
on AC power.
* Electronic Shock Protection
To start/stop recording in
sync with the source player
(Sy nchro-record i ng)
You can easily make digital recordings of
a digital source on an MD.
Before synchro-recording, make
connections to the digital source with a
digital cable, and insert a recordable MD.
‘SYNC” appears in the display.
End 007
,jS3«iitTSYNC n I
u t
I B
2
Press and slide RFC to the right.
The recorder stands by for recording.
3
Play the source sound.
The recorder starts recording when it
receives the playing sound.
continued
11