Labeling a track during playback, Labeling a track or a disc during recording, To cancel labeling, press track mark. note – Sony MZ-R55 User Manual
Page 26: Available characters, To relabel recordings, Notes
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
5
Repeat step 4 and enter all characters
of the label name.
0
Keep pressing the ■ for 2 seconds or
more.
The track or disc is labeled.
Labeling a track during playback
1
2
3
4
Insert a disc and play the track you
want to label.
Press DISPLAY for 2 seconds or
more.
”
; Name” flashes in the display.
Press ■.
The track is ready to be labeled.
Follow steps 4 to 6 of ’’Labeling a disc
during stop” above.
Labeling a track or a disc during
recording
1
Press DISPLAY for 2 iseconds or more
during recording.
”
: Name’’-flashes in the display.
2
To label a track, press .
To label a disc, turn the control to
or ► • until ”<S> : Name”
■flashes in the display, then press ■.
3
Follow steps 4 to 6 of ’’Labeling a disc
during stop” above.
To cancel labeling, press TRACK MARK.
Note
When the recording is stopped while
labeling a track or a disc during
recording, or when the playback moves
on to the next track while labeling a track,
the input at that point is entered
automatically.
Available characters
• Capital and small letters of the English
alphabet
• Numbers 0 to 9
•
! ' ' # $ % & ( ) * . ; < = > ?
@ _ ' + - ' , / : _ (space)
To relabel recordings
Follow the steps corresponding to the
labeling method until the disc or track is
ready to be labeled. Enter a new character
over the one you want to change, then
press EDIT/ENTER (keep pressing ■ for
2 seconds or more on the remote control).
Notes
•You cannot relabel premastered MDs or
label MDs that have not been recorded.
•The recorder is able to display, but cannot
label using, Japanese “Katakana"
characters.
26