To eject the cassette, To prevent accidental erasure – Sony CCD-TR516 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
m
Make sure tliat tlio power source is installed. When vou want to record in the Hi8
system, use Hi8 \ ideo cassette
HiH.
(1) While pressing the small blue button on the hJECT switch, slide it in the
direction of the arrow. The cassette compartment automaticallv lifts up and
opens.
(
2
)
Insert a cassette with the window facing ouf.
(3)
Close the cassette compartment bv pressing the "PUSH" mark on the cassette
compartment. The cassette compartment automatically goes down.
To eject the cassette
While pressing the small blue button on the EJECT switch, slide it in the direction of the
arrow.
To prevent accidental erasure
Slide the tab on the cassette to expose the red mark. It you insert the cassette with the
red mark exposed and close the cassette compartment, the beeps sound for a while. If
you try to record with the red mark exposed, the [d\f>j and ^ indicators fla.sh, and you
cannot record.
To re-record on this tape, slide the tab back out covering the red mark.
10