Sony CCD-TR516 - Manual (Page 65)

■ b ii.*l* j*ii -Ja t I ^ 1 L j||||t||^^
Picture
Symptom Cause and/or Corrective Actions
The playback pictua' is ru.>t clear. • EDIT is set to ON in the menu system.
-> Set it to OPF. (p. 26)
The picture is "nois\’". • The \'idoo heads niav be dirtv.
Clean the heads using the Sony V8-25CLD/V8-25C1.DR
cleaning cassette (not supplied), (p. 59)
An unknown picture is displa\'ed in
the viewtinder. • If 10 minutes elapse after you set the POWER switch to
CAMERA without inserting a cassette, the camcorder
automatically starts the demonstration or DEMO is set (')N
in the menu system.
Insert the cassette and the demonstration stops.
You can deactivate the dememstration. (p. 25)
The five digit code appears. • The self-diagnosis function is activated.
Check the code and sol \’0 the problem, (p, 66)
Picture is recorded in incorrect/
unnatural cok>r. • The NIGHTSHOT switch is set to ON.
Set it to OFF. (p. 30)
Picture appears too bright, and the
subject dcK's not appear in tlie
viewfinder. • rhe NlGHTSHOr switch is sot to ON in a bright place.
Set it to OFF, or use the NightShot function in a dark
place. (pr..50)
others
Symptom Cause and/or Corrective Actions
The supplied Remote Commander
does not work. • COMMANDER is set to Old' in tlie menu system.
4 Set it to ON. (p. 24)
• Something is blocking the infrared rays.
-> Remove the obstacle.
• The batteries are not inserted with the correct polarity.
Insert the batteries with the correct polarity, (p. 72)
• The batteries are dead.
Insert new ones. (p. 72)
The beep sounds for 5 seconds. • Moisture condensation has occurred.
Rernove the cassette and leave the camcorder for at least
1 hour. (p. 58)
• Some troubles occur in your camcorder.
-> Remove the cassette anc. insert it again, then operate the
camcorder.
65