Sony CCD-TR516 - Manual (Page 46)

^ ou can uso the built-in light to suit vour shiHiting situation. The recommended
distance between the subject and camcorder is about 5 feet (1.5 m).
Wliile the camcorder is in Standby mode, slide UGH 1 to ON. The built-in light turns
on.
I'he built-in light turns on/ott b\' turning on/ott STANDB\'.
To stop using the built-in light
Slide toCirr.
To turn on the built-in light automatically
Slide UGHT to AUTO.
The built-in light automatically turns on and off according to the ambient brightness.
However, if the built-in light turns on for more than about 5 minutes, it automatically
turns off. In this case, turn STANDBY down once and turn it up again.
Notes
• The battery pack is quickly discharging while the built-in light is turned on. Slide
UC' t HT to ('>TF when not in use.
• When you do not use the camcorder, slide LIGHT to OFF and remove the batterv pact
to avoid turning on the built-in light accidentally.
• When flickering occurs when vou shoot white and bright subjects in AUTO mode,
slide LIGHT to ON.
• I'he built-in light may turn on/off when you use the PROGRAM AH or BACK LIGH1
function.
• When inserting or ejecting a cassette, the built-in light may be turned off.
CAUTION
Be careful not to touch the lighting section, because the plastic window and
surrounding surfaces are hot while the light is on. It remains hot for a while after
the light is turned off.
DANGER
Not to be handled by children.
Emits intense heat and light.
Use with caution to reduce the risk of fire or injury to persons.
Do not direct light at persons or materials from less than 4 feet (1.22 meters)
during use and until cool.
Slide LIGHT to OFF when not in use.
46