Canon BJC-3000 - Manual (Page 59)

59 Printing on Paper and Other Media
Using Back Print Film
3
Load the back print film as follows.
(a) With the print (matte) side facing up, place one sheet of A4 or Letter
size paper under the stack. Load the stack with the edges aligned
against the right side of the sheet feeder.
(b) Slide the paper guide to the left side of the stack until it is snug.
You can load up to 10 sheets of films in the auto sheet feeder.
4
Open the Printer Properties dialogue box, then select the most appropriate
icon in the Choose Print Mode box under the Main tab. Select Back Print
Film in the Media Type box. Also make sure that the BJ Cartridge Type set-
ting matches the BJ Cartridge you are using. (Change the settings if neces-
sary.)
Print (matte) side up
(a)
(b)
Plain paper
Note
Windows