Canon BJC-3000 - Manual (Page 67)

67 Printing on Paper and Other Media
Using High Gloss Photo Film
3
Open the Printer Properties dialogue box, then select the most appropriate
icon in the Choose Print Mode box under the Main tab. Select High Gloss
Photo Film in the Media Type box. Also make sure that the BJ Cartridge
Type setting matches the BJ Cartridge you are using. (Change the settings
if necessary.)
3
Select the most appropriate icon that indicates the print mode in the
Printer Properties dialogue box. Specify the media type (High Gloss Photo
Film), and the BJ Cartridge you are using.
4
Start the print job.
5
Remove each printed sheet as it is ejected from the printer.
Do not touch the printed side until the ink is completely dry. About 10 min-
utes is required for drying.
Store unused film in the original package in a dry, cool location away from
direct sunlight, high temperature, and high humidity. After storing the
unused film in the package, place it on a stable, horizontal surface so that
the film is not curled or creased in the package.
Windows
Macintosh
Note