Sony CPD-G500 - Manual (Page 11)

Automatically sizing and centering
the picture (AUTO)
You can easily adjust the picture to fill the screen by using the Q
(AUTO) item in the SIZE/CENTER menu.
1 Press the center of the control button.
The main MENU appears on the screen.
2 Move the control button to highlight Q SIZE or
CENTER and press the center of the control
button again.
The SIZE/CENTER menu appears on the screen.
3 First move the control button f/♦ to select 0
(AUTO). Then move the control button
The picture automatically fills the screen.
Notes
• This function is intended for use with a computer running Windows or
similar graphic user interface software that provides a full-screen
picture. It may not work properly if the background color is dark or if
the input picture does not fill the screen to the edges (such as an MS-
DOS prompt).
• Pictures with an aspect ratio of 5:4 (resolution: 1280 x 1024, 1600 x
1280) are displayed at their actual resolution and do not fill the screen
to the edges.
• The displayed image moves for a few seconds while this function is
performed. This is not a malfunction.
Adjusting the size of the picture
(SIZE)
This setting is stored in memory for the current input signal.
1 Press the center of the control button.
The main MENU appears on the screen.
2 Move the control button to highlight S SIZE and
press the center of the control button again.
The SIZE/CENTER menu appears on the screen.
3 First move the control button /f to select B for
horizontal adjustment, or [T] for vertical
adjustment. Then move the control button -^/^ to
adjust the size.
Adjusting the centering of the
picture (CENTER)
This setting is stored in memory for the current input signal.
1 Press the center of the control button.
The main MENU appears on the screen.
2 Move the control button to highlight [3 CENTER
and press the center of the control button again.
The SIZE/CENTER menu appears on the screen.
3 First move the control button ♦/♦ to select O for
horizontal adjustment, or Q for vertical adjustment.
Then move the control button to adjust the
centering.
Enlarging or reducing the picture
(ZOOM)
This setting is stored in memory for the current input signal.
1 Press the center of the control button.
The main MENU appears on the screen.
2 Move the control button to highlight B SIZE or
CENTER and press the center of the control
button again.
The SIZE/CENTER menu appears on the screen.
3 Move the control button to select S3 (zoom),
and move to enlarge or reduce the picture.
Note
Adjustment stops when either the horizontal or vertical size reaches its
maximum or minimum value.
11