Selecting the on-screen menu language (lang), 1 press the center of the control button, Selecting the input signal – Sony CPD-G500 User Manual
Page 8: Move the input switch, Input hd15 bnc i i, 3 move the control button to select a language
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Selecting the on-screen menu
language (LANG)
English. French, German, Spanish, Italian, Dutch, Swedish,
Russian and Japanese versions of the on-screen menus are
available. The default setting is English.
1 Press the center of the control button.
See page 10 for more information on using the control button.
(ffi)
ISCREENI
О
ICENTER
CONV
□
GEOM
EXIT
COLOR
В
LANG
В
SIZE
OPTION
Move the control button to highlight @ LANG and
press the center of the control button again.
Selecting the input signal
You can connect two computers to this monitor using the HD 15
and BNC connectors. To select one of the two computers, use the
INPUT switch.
Move the INPUT switch.
The selected connector appears on the screen for 3 seconds.
INPUT
HD15 BNC
I I
C
“HD15” or “BNC’ appears on the screen.
Note
If no signal is input to the selected connector. NO INPUT SIGNAL
appears on the screen. After a few seconds, the monitor enters the power
saving mode. If this happens, switch to the other connector.
»•€NGL ISH
F R A N Ç A I S
D E U T S C H
E S P A Ñ O L
I T A L I A N O
N E D E R L A N O S
S V E N S K A
Р У С С К И Й
BiÿR
3 Move the control button to select a language.
• ENGLISH
• FRANÇAIS: French
• DEUTSCH: German
• ESPAÑOL: Spanish
• ITALIANO: Italian
• NEDERLANDS: Dutch
• SVENSKA: Swedish
• РУССКИЙ: Russian
• В:ф:|6; Japanese
To close the menu
Press the center of the control button once to return to the main MENU,
and twice to return to normal viewing. If no buttons are pressed, the menu
closes automatically after about 30 seconds.
To reset to English
Press the RESET button while the LANGUAGE menu is displayed on the
screen.
8