Sony CPD-G500 - Manual (Page 20)

Self-diagnosis function
This monitor is equipped with a self-diagnosis function. If there is
a problem with your monitor or computer(s), the screen will go
blank and the (1) (power) indicator will either light up green or
flash orange. If the (!) (power) indicator is lit in orange, the
computer is in power saving mode. Try pressing any key on the
keyboard.
Specifications
If the (!) (power) indicator is green
1 Remove any plugs from the video input 1 and 2
connectors, or turn off the connected computer(s).
2 Press the (!) (power) button twice to turn the monitor
off and then on.
3 Move the control button ^ for 2 seconds before the
monitor enters power saving mode.
If all four color bars appear (white, red, green, blue), the monitor
is working properly. Reconnect the video input cables and check
the condition of your computer(s).
If the color bars do not appear, there is a potential monitor failure.
Inform your authorized Sony dealer of the monitor’s condition.
CRT
Viewable image size
Resolution
Maximum
Recommended
Standard image area
Deflection frequency*
AC input voltage/current
Power consumption
Dimensions
Mass
Plug and Play
Supplied accessories
0.24 mm aperture grille pitch
21 inches measured diagonally
90-degree deflection
FD Trinitron
Approx. 403.8 X 302.2 mm (w/h)
(16 X 12 inches)
19.8" viewing image
Horizontal; 2048 dots
Vertical: 1536 lines
Horizontal: 1600 dots
Vertical: 1200 lines
Approx. 388 X 291 mm (w/h)
(15 Vs X 11 '/2 inches)
or
Approx. 364 X 291 mm (w/h)
(14 Vs X 11 ’/2 inches)
Horizontal: 30 to 121 kHz
Vertical: 48 to 160 Hz
100 to 240 V, 50 - 60 Hz, 2.0 - 1.0 A
Approx. 145 W
Approx. 497 X 480 x 478 mm (w/h/d)
(19 ^/8 X 19 X 18 ^/8 inches)
Approx. 32 kg (70 lb 9 oz)
DDCl/2B/2Bi, GTF**
See page 6
* Recommended horizontal and vertical timing condition
• Horizontal sync width duty should be more than 4.8% of total
horizontal time or 0.8 ps, whichever is larger.
• Horizontal blanking width should be more than 2.3 psec.
• Vertical blanking width should be more than 450 psec.
** If the input signal is Generalized Timing Formula (GTF)
compliant, the GTF feature of the monitor will automatically
provide an optimal image for the screen.
Design and specifications are subject to change without notice.
If the (!) (power) indicator is flashing orange
Press the (!) (power) button twice to turn the monitor off
and then on.
If the (!) (power) indicator lights up green, the monitor is working
properly.
If the (!) (power) indicator is still flashing, there is a potential
monitor failure. Count the number of seconds between orange
flashes of the (!) (power) indicator and inform your authorized
Sony dealer of the monitor’s condition. Be sure to note the model
name and serial number of your monitor. Also note the make and
model of your computer and video board.
20