Sony MDS-S38 - Manual (Page 15)

Recording on MDs
5 Press STANDBY.
The CD player pauses for playing and the deck
pauses for recording.
6 Press START.
The deck starts recording and the CD player starts
playback.
The track number and elapsed recording time of
the track appear in the display.
If the CD player does not start playing
Some CD player models may not respond when you
press START on the remote of the deck. Press II on the
remote of the CD player instead.
7 Press STOP to stop synchro-recording.
You can also do synchro-recording with a Sony video
CD player
Using the procedure for synchro-recording with a Sony
CD player, you can do synchro-recording with a Sony
video CD player also.
To select the video CD player, press button number 2
while pressing down the POWER button before starting
the procedure.
To select the CD player again, press button number 1
while pressing down the POWER button.
The deck is factory set to a CD player for svnchro-
recording.
'O' You can check the remaining recordable time on the
MD
Press DISPLAY (see page 17).
To pause recording
Press STANDBY or CD PLAYER II.
To restart recording, press START or CD PLAYER II.
A new track number is marked each time you pause
recording.
Note
When using the supplied remote for synchro-recording, set
the mode selector on the CD player to CDl.
'Q' You can use the remote of the CD player during
synchro-recording
When you press ■ , the CD player stops and the deck
pauses for recording.
When you press II, the CD player pauses and the deck
pauses for recording.
To restart synchro-recording, press O.
'y You can change CDs during synchro-recording
Do the following steps instead of Step 7 above.
1 Press ■ on the remote of the CD player.
The deck pauses -for recording.
2 Change the CD.
3 Press O on the remote of the CD player.
Synchro-recording restarts.
15"