Recording on an md – Sony MDS-S38 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Recording on an MD
Monitor audio during recording
Even if you set REC MODE to
MONO, the monitor signal does
not become n^onaural.
1
7 4
5
Turn on the amplifier and play the program source you want to
record.
Press POWER.
The POWER indicator turns off.
Insert a recordable MD.
With the arrow
pointing this way
If the MD has a recorded material on it, the deck will
automatically start recording from the end of the last recorded
track.
Set INPUT to the corresponding input connector.
To record through
Set INPUT to
DIGITAL IN
DIGITAL
LINE (ANALOG) IN
ANALOG
Set REC MODE to the mode you want to record in.
To record in
Set REC MODE*’ to
Stereo sound
STEREO
Monaural sound*^
MONO
If you switch REC MODE during recording or recording pause, recording
stops.
In the monaural recording, you can record about two times longer than in
the stereo recording.