Understanding the multi-channel surround displays – Sony STR-DE635 User Manual
Page 32
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Understanding the Multi-Channel Surround Displays
Ш
1
OPTICAL
H
COAXIAL
1
lililTIHiTlWITircirRl
L.F.E.
S.WOOFERiSTEREO
i
1
1
PRO LOGIC IlLSll S llRsi
■ :•
D.RANGE MONO
Ш OPTICAL
Lights up when the source signul is a digital signal
being input through the OPT terminal.
[2] COAXIAL
Lights ирч when the source signal is a digital signal
being input through the COAX terminal.
[3] DC DIGITAL
This indicator lights when a sound field other than
2 CHANNEL is selected and the unit is decoding
signals recorded in the Dolby Digital (AC-3) format.
[4l Playback channel indicators
The letters light to indicate the channels being played
back.
L: Front Left
R: Front Right
C: Center (monaural)
LS: Left Surround
RS: Right Surround
S; Surround (monaural or the rear components
obtained by Pro Logic processing)
The boxes around the letters light to indicate the
speakers used to playback the channels.
See the next page for details regarding the playback
channel indicators.
[g S.WOOFER
Lights when sub woofer selection is set to "YES" and
this unit detects that the disc being played does not
contain the LFE channel signal. While this indicator is
lit, this unit creates a sub woofer signal based on the
low frequency components of the front channels,
[T1 Tuner indicators
These indicators light when using the receiver to tune
in radio stations, etc. See pages 39-42 for tuner
operations.
E D. RANGE
Lights when dynamic range compression is active. See
page 35 to adjust the dynamic range compression.
[g PRO LOGIC
Lights when this unit applies Pro Logic processing to
two channel signals in order to output the center and
surround channel signals.
121 AC-3 or □□
Lights when Dolby Digital (AC-3) signals are input.
U L.F.E
The letters "L.F.E" light up when the disc being played
contains the LFE (Low Frequency Effect) channel.
When the sound of the LFE channel signal is actually
being reproduced, the bars underneath the letters
lights up to indicate the level. Since the LFE signal is
not recorded in all parts of the input signal the bar
indication will fluctuate (and may turn off) during
playback.