Speed dialing, Storing phone numbers, Program – Sony SPP-M920 User Manual
Page 19: Location, Programming, Incomplete, Notes, Tips
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advanced Features
Speed dialing
You can dial with the touch of a few keys by storing phone numbers
on dialing keys.
Storing phone numbers
With the handset off, enter the
number that you wish to store
(up to 20 digits).
Press and hold
(SPEED DIAL/PGM)
for more than one second.
The display will change to
"PROGRAM LOCATION."
PROGRAM
LOCATION
Enter the two digit (® Q3 to
CD CD) memory location where
the number is to be stored.
The unit will store the number
and sound a confirmation tone.
If programming is unsuccessful,
the display will change to
"PROGRAMMING
INCOMPLETE."
>
a.
<
a>
3
ft
16
Q.
at
(/)
PROGRAMMING
INCOMPLETE
Notes •
• In step 1, you can press (
redial
)
to recall the previous number dialed.
• If you press (
SPEED DIAtyPGM~)
and the two digit memory location without
entering a number to store, the previously stored number will be erased.
• Do not allow more than 30 seconds to elapse between each step of the
procedure.
Tips
• If you enter a wrong number, press (
OFF),
then start from the beginning.
• You can't receive calls while you are storing numbers.
• Press (
HOLD/PAUSE
) to insert a two second pause in the dialing string.
continued
Advanced Features
19"