Sony SPP-M920 - Manual (Page 31)

Using the Caller ID list
You can easily call hack a number from the Caller ID list bv pressing
C line Q or ( l i n e 2 ).
You can also store a number from the Caller ID list into one of the
speed dialing buttons.
Calling back a number from the Caller ID list (Local calls only)
1
Press (CALLER ID).
The display shows the memory location number and the
name for the most recent call.
2
3
Press AC*TONEO or T(5)to display the Caller ID data
(either phone number or name) you want to dial.
Press ( LINE 1 ) or (LINE2).
The selected phone number of the selected Caller ID data
will be dialed.
Note
When calling a number using the Caller ID list, only the last seven digits are
dialed. If you need to dial a long distance number, enter the number "1" and
the area code first and then select from the Caller ID list.
Storing a number into the speed dialing from the Caller ID
list (Local calls only)
1
Press (CALLER ID).
The display shows the memory location number and the
name for the most recent call.
Press A(*TONE) or to display the Caller ID data
(either phone number or name) you want to store and press
(CALLER ID).
3
4
Press (SPEED DIAL7PGM).
"PROGRAM LOCATION" appears on the display.
Press the dialing keys ((® (T) to d!) ) for the phone
number of the selected Caller ID data to be stored.
You hear a confirmation beep, and the phone number is
stored.
5
Press (OFF) to finish.
>
Q.
<
U 3
ft
<6
a
T1
(D
<U № i
? I
(D
l/i
Notes
• When storing numbers, do not let more than 30 seconds elapse between any
two steps of the storing procedure.
• When storing a number in Speed dial using the Caller ID list, only the last
seven digits are displayed. If you need to store a long distance number, enter
"1" and the area code first, then select from the Caller ID list. ,
Advanced Features 3T