Sony SPP-SS965 - Manual (Page 16)

To obtain the best speakerphone performance
• You may not be able to hear the other party's voice in a noisy place.
Therefore, use the speakerphone in a quiet room.
• Do not bring your hand or other object too close to the microphone
or you will hear a shrill noise ("feedback").
• When the speaker volume is loud, or the base phone has been placed
close to a wall, you may find that the volume drops suddenly. This
is due to a circuit in the telephone designed to protect against
feedback. In such cases, lower the speaker volume slightly.
Making calls (continued)
Redialing
1
Press ( TALK/ CALL WAITING/ FLASH) and wait until "TALK"
appears on the display.
The LINE lamp on the base phone lights up.
If you're at the base phone, press (SPEAKERPHONE).
"SPEAKERPHONE" appears on the display and the LINE
lamp lights up.
2
Press (
REDlAtyPAUSE
) to redial the last number dialed.
Note
If the number exceeds 32 digits or if it is erased, five short error beeps will alert
you that the number can't be redialed.
Tip
The number to be redialed is the last number dialed either on the handset or on
the base phone. '.
To check the phone number before redialing
When not making a call with either the handset or base jahone, press
(REDIA 17PAUSE).
The last number dialed is displayed for five seconds.
To dial the number, press ( TALK/ CALL WAITING/ FLASH ) while the
number is displayed. If you're at the base phone, press
(SPEAKERPHONE).
Note
The number will not be displayed if the last number dialed exceeds 32 digits or
if it is erased.
To erase the last phone number dialed
When not conversing with an outside caller with either the handset or
base phone, press ( REDtAL/PAUSE ) twice within five seconds.
The number will be erased from the memory, and you'll hear a long
confirmation beep.
Basics