Troubleshooting – Sony SPP-SS965 User Manual

Page 42

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Troubleshooting

[f you've experienced any of the following difficulties while using your

phone, use this troubleshooting guide to help you remedy the problem.

Should any problem persist, consult your nearest Sony dealer.

Symptom

Remedy

S

You hear five short error
beeps when you press

( TALK/ CALL WAITING/ FLASH ).

Make sure you have set up the base phone correctly
(page 8).
Move the handset closer to the base phone.
Replace the handset on the base phone, then pick it up
and try again. If the handset is on the base phone, pick
up the hanifset and replace it again.

You hear no dial tone.

• Make sure the telephone line cord is securely

connected to the telephone outlet.

• Make sure the battery is fully charged (page 11).

The phone does not connect at
all, even though the number
you dial is correct.

• Make sure the dialing mode is set correctly (page 10).

The phone does not redial
correctly.

• Make sure the last dialed number is really the one you

want to dial.

You hear five short error beeps
when you try to redial.

• The number you last dialed exceeds 32 digits

(including the tone and pause digits if used).

• The number you last dialed is erased.

You cannot perform the redial
operations (redialing, checking
and erasing the phone
number), and "OUT OF
RANGE" appears on the
display.

• Move the handset closer to the base phone and

perform the redial operations again.

You cannot hear anything from
the speakerphone.

• Slide the SPEAKER VOLUME control on the base

phone to increase the speakerphone volume.

The handset does not ring.

• Set the RING switch ctn the hitndset to ON.
• The battery may be weak. Charge the battery for more

than 12 hours (page 11).

• Make sure you have set up the base phone correctly

(page 8).

• Move the handset closer to the base phone.
• Replace the handset on the base phone, then pick it up

and try again. If the handset is on the base phone, pick
up the handset and replace it again.

The base phone does not ring.

• Set the RINGER switch on the base phone to ON.
• Make sure the telephone line cord is securely

connected to the telephone outlet.

Additional Information

Advertising