Changing a stored name and/or phone number – Sony SPP-SS965 User Manual

Page 24

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

4

Press (voiyPGM).

"ENTER NUMBER" appears.

Phone Directory (continued)

Enter the phone number.

You can enter up to 16 digits, including a tone
and a pause, each of which is counted as one digit.

SONY

1234'

O Press (VOUPGM).

You'll hear a long confirmation beep, and the name and the
number are stored. The display goes off.

Notes

• If you intend to save a 51st phone number, you will hear five short error

beeps and "MEMORY FULL" will be displayed. You cannot store the phone
number. To store another phone number, erase one of the stored phone
numbers (see page 25).

• Do not allow more than 20 seconds to elapse between each step of the

procedure.

Tips

• If you have entered a wrong name or number in step 3 or 5, turn Jog Dial

down to erase it. Then enter the correct name or number.

• You may press Jog Dial instead of (

VOL/PGM

) in steps

4

and 6.

• To store a number to be dialed via PBX, follow the steps on page 20 when

entering a phone number.

Changing a stored name and/or phone
number

1

Display the name and phone number you want

to change by doing steps 1 and 2 on page 26.

2

Press Jog Dial.

SONY

123456?

. u M <

_ ERASE

Telephone Features

Advertising