Sony KV-27S25 - Manual (Page 12)

step 2: Installing the
glass door and
■ KV-32TW25I35V75 only
Follow these instructions to install the glass door and
adjust the shelf.
Push here to close.
To open, push again.
Parts List
o Bottom hinge
ezS
1
0 Top hinge
liHii
1
O Screw 4x4 02D 4
O Plate pad
o
]
0 Plate
q._ J
1
Installing the glass door
1
Check that the projection of the screw
through the hinge allows for proper
installation of the hinge to the glass door,
and then insert the bottom hinge
O
into
the hole located at the bottom, right side
of cabinet.
Attach the top hinge 0 to the right side of
the glass door, tighten the screws snugly,
but do not overtighten. Attach the plate
pad O to the left side and push the plate 0
over the plate pad.
Push the top, glass door hinge into the top,
right bushing and gently slide the glass
door into the bottom hinge. Adjust the
glass door until level, and tighten the hinge
screws.
■j 2 Getting Started
Note
• The glass door is made of tempered glass. Although it is more
shock-resistant than ordinary glass, tempered glass may
shatter if it is dropped or receives a sudden shock.