Step 4: setting up the tv automatically, Auto set up), 1 press power to turn on the tv – Sony KV-27S25 User Manual
Page 15: 3 press volume, To perform auto set up again, To browse the main functions (demo)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
step 4: Setting up
the TV automatically
(AUTO SET UP)
You can set up your TV easily by using the AUTO SET
UP feature. It presets all the receivable channels.
To set up the TV manually, see "Setting cable TV on or
off" (page
17)
and "Presetting channels"(page
17).
(Front of TV)
SET UP TV VIDBO -
VOLUME -
o g
Q o
O STAND BY STEREO
PIP
For KV-27V35 / 29V35C / 29V75M / 32V35 / 34V35C /
35V45/35V75, the control buttons are located on the
top of the TV.
Before you start using AUTO SET UP, be sure to
connect the antenna or cable to the TV (see
page 5).
1
Press POWER to turn on the TV.
The AUTO SET UP screen appears.
POWER
ENGLISH :
[CHH
ESPAÑOL
ÍCH-)
AUTO SET UP
[VOL-!
DEMO
(TV,VIDEO!
F.rs! please connec!
the antenna
Press [SET UP) to
exit.
Note
• The AUTO SET UP screen appears whenever you press
the POWER button if you do not execute AUTO
PROGRAM.
<2
(E x c e p t C a n a d ia n m o d e ls )
Press CHANNEL + to select English screens
or CHANNEL - to select Spanish screens.
- CHANNEL +
3
Press VOLUME
- VOLUME +
"AUTO PROGRAM" appears on the screen and
the TV starts scanning and presetting channels
automatically. When all the receivable channels are
stored, "AUTO PROGRAM" disappears and the
lowest numbered channel is displayed. If the TV
receives cable TV channels, CABLE is set to ON
automatically.
To perform AUTO SET UP again
1
Press SET UP on the TV.
2
(E x c e p t C a n a d ia n m o d e ls )
Press CHANNEL + or CHANNEL - to select the
language.
3
Press VOLUME-.
The picture and sound settings will be set to the
factory preset conditions.
4
Press CHANNEL +.
"AUTO PROGRAM" appears on the screen and the
TV starts scanning and presetting channels.
5 Press CHANNEL - to exit the AUTO SET UP menu.
To exit AUTO PROGRAM
Press anv button.
Notes
• If the TV is set to a video input, you cannot execute AUTO SET
UP. Press TV (black button) so that a channel number appears,
• Using the AUX connector, press TV (black button) first and
make sure that "AUX" is displayed beside the channel number
on the screen. Then follow the procedure above to perform
AUTO SET UP. (RV-27S35/27V3S/29V35C/29V75M/32S,35/
32V35/34V35C/35V35/35V45/35V75oiih/)
To browse the main functions (DEMO)
Press TV/VIDEO on the TV in step 3. The functions
and menus are displayed one by one.
To exit DEMO
Press anv button.
Getting Started
15