Step 1: hookup, How to connect different types of cables, Cable or antenna – Sony KV-27S25 User Manual
Page 5: Cable box, Cable box and cable, Cable and antenna, Getting started
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Getting Started
Step 1: Hookup
Connecting an antenna/cable TV
system without a VCR
Although you can use either an indoor or outdoor
antenna with your TV, we recommend that you
connect an outdoor antenna or a cable TV system to get
better-picture quality.
How to connect different types of
cables
The illustrations below show examples of connecting
cables to the TV directly.
75-ohm coaxial cable
• VHP only
or
• VHF/UHF
or
• Cable
• VHF only 300-ohm twin lead cable
(Rear of TV)
VHF/UHF
(Rear of TV)
VHF/UHF
75-ohm coaxial cable
• VHF
and
UHF
(Rear of TV)
VHF/UHF
EAC-66 U/V mixer
(not supplied)
300-ohm twin lead cable
Notes
• Most VHF/UHF combination antennas have a signal splitter.
Remove the splitter before attaching the appropriate connector.
• If you use the U/V mixer, snow and noise may appear in the
picture when viewing cable TV channels ov’er37.
If your cable company requires you to connect a cable
box, make the connection as follows:
Cable or antenna
Cable
(Rear of TV)
VHF/UHF
Cable box
(Rear of TV)
VHF/UHF
Cable
IN
OUT
Cable box
Cable box and cable
■
KV-27S35I27V3SI29V35CI29V75MI32S35I32V35/
34V35CI35V3SI3SV4SI35V7S only
(Rear of TV)
AUX
75-ohm coaxial
cable (not supplied)
CATV cable
VHF/UHF
Pay cable TV systems use scrambled or encoded signals
requiring a cable box"^ in addition to the norma! cable
connection.
* The cable box will be supplied by the cable company.
Note
• You cannot watch the signal through AUX connector ns a
window picture.
Cable and antenna
■
KV-27S35I27V3SI29V35CI29V75MI32S3SI32V35I
34V35CI3SV35I3SV45I35V75 only
CATV cable
(Rear of TV)
AUX
m
TO
CONVERTER
Antenna cable
VHF/UHF
Note
• Do not connect anything to the TO CONVERTER connector in
this case.
Getting Started 5