To select the answering mode, Wheh the'memory is full, However, the greeting will not change – Sony SPP-A400 User Manual

Page 22

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Preparing the answering machine (continued)

To select the answering mode

There are three options of answering mode. Select the answering
mode by setting the RINGER SELECT switch.

RINGER SELECT
switch

Set RINGER SELECT to

Mode

TS (Toll Saver)

If new messages have been recorded, the phone answers at the third
ring and records incoming messages; if no new messages are
recorded, it answers at the fifth ring. You can save the toll for the
call when you pick up messages from an outside phone (see page
27).

3

The phone always answers at the third ring and records incoming

messages.

ANN ONLY

The phone plays the greeting only, without recording incoming

messages (Announcement only).

Note

The same greeting is used regardless of the answering mode. Therefore, if you
decide to change the mode, make sure that you record a new greeting to match
the answering mode.

Wheh the'memory is full

The recording area of this phone's memory is 15 minutes (including
the greeting, messages, and memo). If the remaining recording area
becomes less than one minute, "F" flashes on the counter, and the
phone automatically switches to ANN ONLY mode, which doesn't
record messages.

However, the greeting will not change.

To avoid this, erase unnecessary messages (see page 23). You can also
erase the messages from an outside phone (see page 27).

22™ I Answering Machine Features

Advertising