Mounting the base unit on a wall – Sony SPP-A400 User Manual
Page 29
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Mounting the base unit on a wall
1
About 6 inches (15 cm)
AC power
adaptor cord
Telephone
line cord
1
2
Reverse the hang-up tab.
Bundle the telephone line cord
and put it in the wall bracket.
Plug the AC power adaptor to
the DC IN 9V jack, and hook the
cord.
Attach the wall bracket to the
base unit. Align the A marks of
the wall bracket with those of
the base unit.
Plug one end of the telephone
line cord to the LINE jack, and
the other end to the telephone
outlet.
Hook the base unit to the wall
plate.
Plug the AC power adaptor to
an AC outlet. Then fully extend
the antenna.
5~7
Wall
bracket
Wall plate
AC outlet
Tip
To remove the wall bracket, press the lower tabs.
Telephone
line cord
>
a
a
o'
3
SL
3
0
3
tu
r*
o'
3
AC power adaptor
Additional Information | 29^'