Connecting an aa/ receiver, Note, Connecting two vcrs for editing – Sony KV-32V68 User Manual
Page 12: Connecting a dbs receiver, Connecting and installing the tv (continued)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting and Installing the TV (continued)
Connecting an AA/ receiver
1
Using A/V cables, connect TV OUT on your
TV to TV IN on your A/V receiver.
2
Using a single video connector, connect
MONITOR OUT on your A/V receiver to
VIDEO 1 IN on your TV.
Note
• When you are in a video mode (VIDEO 1, 2, or 3),
you will not be able to access the GUIDE Plus+
feature.
Connecting two VCRs for editing
MONITOR OUT gives you the ability to use a
second VCR to record a program being played
by the primary VCR or to perform tape editing
and dubbing.
1
Connect the VCR intended for playback using
the setup instructions on page 5 of this
manual.
2
Using A/V connectors, connect AUDIO and
VIDEO IN on your VCR intended for
recording to MONITOR AUDIO and VIDEO
OUT on your TV.