Cable or antenna connections c, Connecting directly to cable or an antenna, Notes – Sony KV-32V68 User Manual
Page 7: Cable and antenna, Cable or antenna connections
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Cable or Antenna Connections c
Connecting directly to cable or an
antenna
The connection you choose will depend on the
cable found in your home. Newer homes will be
equipped with standard coaxial cable (see
A);
older homes will probably have 300-ohm twin
lead cable (see B); still other homes may contain
both (see C).
75-ohm coaxial cable
VHF
and
UHF
(Rear of TV)
VHF/UHF
EAC-66 U/V mixer
(not supplied)
Notes
• In order to receic'e channels with an antenna,
you will need to turn your CABLE to OFF (see
page 31) and perform the AUTO PROGRAM
function.
• The GUIDE feature will not function for items
connected to the AUX input.
300-ohm twin lead cable
VHF only
or
VHF/UHF
or
Cable
VHF only
or
UHF only
or
VHF/UHF
75-ohm
coaxial cable
(Rear of TV)
VHF/UHF
:1s:
300-ohm twin
lead cable
Cable and antenna
If your cable provider does not feature local
channels, you may find this set up convenient
for viewing both local and cable channels.
Select cable or antenna mode by pressing ANT
on the remote control. You will be able to
alternate between the two input sources.
(Rear of TV)
VHF/UHF
CATV cable
(Rear of TV)
AUX
Antenna connector
(No connection “TO
CONVERTER" in this case)
Antenna cable
TO CONVERTER
VHF/UHF