Basic set up, Inserting batteries, Using the remote control move & select buttons – Sony KV-32V68 User Manual
Page 15: Notes, On-screen help/instructions, Adjustment bars
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Basic Set Up
Inserting batteries
Insert two size AA (R6) batteries (supplied) by
matching the + and - on the batteries to the
diagram inside the battery compartment.
Using the remote control
move & select buttons
Notes
• Remove the batteries to avoid damage from
possible battery leakage whenever you
anticipate that the remote control will not be
used for an extended period.
• Handle the remote control with care. Avoid
dropping it> getting it wet, or placing it in direct
sunlight, near a heater, or where the humidity is
high.
• Your remote control can be programmed to
operate most video equipment, (see page 34)
On-screen help/instructions
Several menu windows will provide prompts
and instructions to assist you in navigating
through the different functions.
When presented, use these to supplement the
instructions in this manual.
The supplied remote control has "arrow"
buttons (♦ , ♦ , ♦ , ♦ ) which allow for movement
of the on-screen selector. Pressing on the outer
buttons will cause the selector to
move
in the
corresponding direction. Pressing the center
button (fTT) will
select
the iterri.
Adjustment bars
When menu items present an adjustment bar
(or —..................■ •), use the arrow buttons to
change the setting.
1
-