Sony CDP-670 - Manual (Page 11)

Ptx)gramming Selections Directly
You can make a program easily by using the numeric
buttons on the remote commander.
iilMiiiiiglMiiiil
♦ To choose a selection number over 16, see page 7.
To check your program___________________________
Press CHECK. The first selection In the program will be
displayed.
Each time you press CHECK, the next selection in the
program will be displayed. The last selection will be
indicated with the display “End”.
To return to the initial display, press CHECK once more.
To adjust the blank spaces between selections___________
In a program, if you do not change the order of selections,
the spaces between those selections remain the same as on
the disc. Otherwise, the spaces are shortened to 1 second.
You can make all the blank spaces 3 seconds long. See page
13 for details.
To change your program
You can make the following changes before starting play
To erase the last selection, press CLEAR.
Each time you press CLEAR, the last selection in the
program will be erased.
To add a selection to the end of the program, just press
the numeric button for that selection. You can add a
selection also during play or pause.
I
To delete a selection, press CHECK repeatedly until the
undesired selection is displayed. Then press CLEAR.
To change the order, press ■ during stop to erase the
program. Then repeat the programming procedure from the
beginning.
If “—” is displayed instead of the actual time
— you have programmed a selection number over 20.
— the total time has exceeded 100 minutes. To check the remaining time
Press TIME once to see the remaining time of the selection being
played; twice to see the total remaining time; once more to return
to the initial display.
If you have inserted a pause, the display shows the remaining
number of selections and time until the pause.
If you have programmed a selection number over 20, “—” is
displayed instead of the actual time.