Connecting the cd player – Sony CDP-670 User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting the CD Player
You can connect the unit with analog or digital signal depending on your amplifier or D/A converter.
Notes on Connection
Turn off the power of each unit before making connections.
Connect the AC power cord last. For the model supplied
with the plug adaptor, use it if the plug of the power cord
does not match your wall outlet.
For CDP-M27 only:
Insert the AC power cord firmly into the AC IN jack on the
rear panel of the unit before you connect it to an AC outlet.
Be sure to insert the plugs firmly into the jacks. Loose
connection may cause hum and noise.
Leave a tittle slack in the connecting cord to allow for
inadvertent shock or vibration.
Cord plugs and jacks are color coded. Red plugs and jacks
are for the right channel (R) and white ones for the left
channel (L).
Connecting to an Amplifier without a Digital Input
? li;
Connecting to a Unit with an Optical Digital Input (For CDP-670 only)
5