Sony CDP-670 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Designating the Playing Order and Time—Program Play
Designating the Total Playing Time
—Time Edit
You can designate a time and the unit will make 2 different
programs of selections each fitting within that period. Use
this function, by designating the length of your tape, for
editing both sides of a tape.
♦ Press [Tol for ‘^0”.
When the selections for side A have been played
The unit will pause. Set tape to the beginning of side B, then
press (II). The selections for side B will be played.
To include desired selections in the program
1
Make your own program of the desired selections.
See page 10 for instructions.
Follow the procedure on the preceding page.
Just designate the length of your tape; you need not
subtract the length of your program. The unit will place
your selections at the beginning of its program and add
other selections to fit the remaining time.
If you disc has more than 20 selections
Selections over nunnber 20 cannot be programmed with the time
edit function; use the programming procedure on page 10.
If any selections remain unprogrammed
To make a further program, repeat step 5.
12
To designate a different time for each
Execute steps 1 to 4, then press PROGRAM (PGM) and ^l| (||).
“EDIT” disappears from the window. Execute steps 2 to 4 for the
other side.