Sony CDP-670 - Manual (Page 14)

Specifications Maintenance
Compact disc player
CDP-670 CDP-47D/270/M27
Frequency response 2 Hz - 20 kHz
(± 0.5 dB) 2 Hz - 20 kHz
(± 1 dB)
Signal-to-noise ratio More than 100 dB
Dynamic range More than 93 dB More than 90 dB
Harmonic distortion
(1 kHz)
Less than 0.008% Less than 0.09%
Channel
separation
More than 95 dB (1 kHz)
Outputs LINE OUT (phono jacks)
Output level 2 V (at 50 kilohms)
Load impedance over 10 kilohms
DIGITAL OUT
(OPTICAL)
(optical output
connector)
Wave length
660 nm
Output level
-18 dBm
—
General
CDP-67Q/470/270 GDP-M27
Power requirements 120V AC, 60 Hz
Power consumption 12W 10W
Dimensions
(approx., including
projections) 430 X 95 X 275 mm
(17 X 3^4 X 10 inches)
355 X 80 X 275 mm
(14 X 3 V 4 X 10 inches)
Weight (approx.) 3.5 kg (7 tbs 12 oz) 3.0 kg (6 lbs 10 oz)
Cleaning Your Unit
Clean the cabinet, panel and controls with a soft cloth lightly
moistened with a mild detergent solution. Do not use any
type of abrasive pad, scouring powder or solvent such as
alcohol or benzine.
Cleaning Discs
When a disc becomes
dirty, clean it with a
cleaning cloth. Wipe the
disc from the center out.
Do not use solvents such as benzine, thinner, commercially
available cleaners or anti-static spray intended for analog
discs.
Supplied accessories
Audio signal connecting cord
{2 phono plugs - 2 phono plugs) (1)
For CDP-670/470 only:
Remote commander (1), Sony SUM-3 (NS) batteries (2)
ForCDP-M27 only:
AC power cord (1)
Design and specifications subject to change without notice.
Optional accessory
Optical cable PCC-15 (for CDP-670)
14