Tips, Searching for the beginning of a track (ams*), Notes – Sony DHC-MDX10 User Manual

Page 17

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

n Press ^ and insert a recorded tape

in deck A or B.

With the side
you want to

play facing

forward

Press DIRECTION repeatedly to
select to play one side. Select

to play both sides.

To play both decks in succession, select

RELAY (relay play).“^*

Press TAPE A (or TAPE B) ►

(DECK A (or DECK B) ► on the

remote).

Press TAPE A (or TAPE B) to play
the reverse side. (Press DECK A (or
DECK B) ► again on the remote to play
the reverse side.) The tape starts playing.

The deck stops automatically after

repeating the sequence five times.

Relay play always follows the following
sequence;

Deck A (front side). Deck A (reverse side).
Deck B (front side), Deck B (reverse side).

To

Do this

Stop play

Press ■.

Fast-forward

Press or

Rewind

Press ◄◄ or

Remove the cassette Press A.

Adjust the volume

Turn VOLUME (or press
VOL -1- /- on the remote).

Tips

• Pressing TAPE A (or TAPE B) ► or when the

power is off automatically turns the power on and
starts tape playback if there is a tape in the deck
(One Touch Play). When the system is in the
Power Saving Mode, the One Touch Play function
does not work.

• You can switch from another source to the tape

deck just by pressing TAPE A (or TAPE B) ► or

(Automatic Source Selection).

• When you want to reduce the hiss noise in low-

level high-frequency signals, press DOLBY NR so
that "DOLBY NR" appears.

Searching for the beginning of a

track (AMS*)

During playback, turn the jog dial the same
direction as the or ► indicator to go
forward. Turn the opposite direction to go
back. (Or press or on the remote.)

The search direction, + (forward) or - (back),

and number of songs being skipped (1~9)
appear in the display.

Example: searching forward 2 songs

n n r

n r L

n

I I

AMS (Automatic Music Sensor)

Notes
The AMS function may not operate correctly under
the following circumstances:

- When the unrecorded space between songs is less

than 4 seconds long.

- If completely different information is recorded on

the left and right channels.

- When there are continuous sections of extremely

low level or low frequency sound (like those of a
baritone sax).

- When the unit is placed near a television. (In this

case, we recommend moving the unit farther away
from the television or turning off the television.)

00

iU

l/l
n
O

»1

9

"t

%

..•ciWW.l'

O

3

V)

17

Advertising