Labelling a cd, You can use the following symbols, To enter a space – Sony DHC-MDX10 User Manual
Page 28: If you made a mistake, To erase the character
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Labelling a CD
- Disc Memo Function
4
Press NAME EDIT/CHAR.
The cursor starts flashing.
You can label up to 50 CDs with titles of up to
20 symbols and characters. Whenever you
load a labeled CD, the title (disc name)
appears in the display.
l/(!)
(Power)
DISC SKIP/
EX-CHANGE
1 2
6
4 7
Press FUNCTION repeatedly until
"CD" appears.
To label a disc, press ■ to stop
playing a disc. When "SHUFFLE" or
"PROGRAM" appears in the
display, press PLAY MODE
repeatedly until it disappears.
3
Press DISC SKIP / EX-CHANGE
repeatedly to select the desired CD.
Press NAME EDIT/CHAR
repeatedly until the type of
character you want appears.
Each time you press the button, the
display changes as follows;
A (Upper case) —*■ a (Lower case)
—► 0 (Numbers) —► ! (Symbols)*
—> Lj (Space)**—* A . . .
* You can use the following symbols.
!"#$%&'()*-i-,-. / ;;<=>?©_'
** To enter a space
Go to step 7.
You cannot label the blank space
from the first letter.
6
Turn jog dial until the character you
want appears.
7
Press
The cdrsor shifts rightward and waits for
the input of the next character.
8
Repeat steps 5 to 7 to complete the
entire title.
if you made a mistake
Press or ►► until the character you
want change flashes, then repeat steps 4
to 6.
To erase the character
Press CLEAR while the character is
flashing
9
Press ENTER/YES to complete the
labelling procedure
28