Sony CMT-EX22 - Manual (Page 7)

Step 2: Setting the time
You must set the time before you can use the
timer functions.
The clock is on a 24-hour system for the European
model, and a 12-hour system for other models.
The 24-hour system model is used for illustration
purpose.
Set the time before turning the power on.
2.3,4
©00^
o
o
©
0
O O O
o o o
O O O
o o o
© 0 0 0
eEB'
.
0
—
0 0 0
(^_
o o o o
DISPLAY
1
2,3,4
1
Press CLOCK/TIMER SET while the
power is off.
The day indication flashes after “CLOCK
SET” flashing.
t V i i I ) t.: it
T-r
3
Press +/— to set the hour then press
ENTER.
The minute indication flashes.
-L-A-
TWlfr
—'f
4
Press +/- to set the minute then press
ENTER.
The clock starts.
To change the time
You can change the preset time while the power is
on.
1 Press CLOCK/TIMER SET.
2 Press +/- repeatedly until “CLOCK SET”
appears then press ENTER.
3 Repeat steps 2 to 4.
To show the time
You can display the clock any time.
Press DISPLAY repeatedly until the clock display
appears.
Tips
• If you have made a mistake, start over from step I.
• The built-in clock shows the time in the display
while the power is off.
• The upper dot flashes for the first half of a minute
(0 to 29 seconds), and the lower dot flashes for the
last half of a minute (30 to 59 seconds).
o
9
f*
f*
HI
3
(fi
(4
f*
fi)
9
a
2
Press +/- to set the day then press
ENTER.
The hour indication flashes.
vA#":r
t