Presetting radio stations, To change a preset station, Note – Sony STR-DE405 User Manual
Page 12: Tuning preset stations (preset tuning), You can tune by scanning the preset stations, Receiver operations
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Receiver Operations
Presetting Radio Stations
You'll most likely want to preset the receiver with the
radio stations you listen to often so that you don't have
to tune in the station every time. The receiver can store
a total of 30 FM or AM stations. You can store the
stations on preset numbers combining 3 characters (A,
B, C) and numbers (0 - 9), For example, you can store a
station as preset number Al, B6 or C9, etc.
Numeric buttons
SHIFT
a
0
O I
=== :
1 O
1 O
J o
l
LD
--------------------------------
TUNER MEMORY
1
Press TUNER.
The last received station is tuned in.
2
Tune in the station you tvant.
If you are not familiar with how to tune in a
station, see "Receiving Broadcasts" on the
previous page.
3
Press MEMORY.
"MEMORY" appears for a few seconds.
Do steps 4 and 5 before "MEMORY" goes out.
4
Press SHIFT to select a character (A, B or C).
Each time you press SHIFT, the letter "A," "B" or
"C" appears in the display.
If "MEMORY" disappearsi start again from step 3.
5
while MEMORY is displayed, press the number
you want to use (0 to 9).
6
Repeat Steps 2 to 5 to preset other stations.
To change a preset station
Preset a new station on the number you want to change.
Note
If the AC power cord is disconnected for about one week,
the preset stations will be cleared from the receiver's
memory, and you will have to preset the stations again.
Tuning preset stations (preset tuning)
You can tune directly to a preset station by entering its
preset number. If you don't know which stations are
preset on which numbers, you can tune by scanning
the preset stations.
1
Press TUNER.
The last received station is tuned in.
2
Press SHIFT to select a character (A, B or C), then
press the number.
For example, select A and then press 7 to tune in
the station preset
as
A7.
You can tune by scanning the preset stations
First press TUNER and then press PRESET TUNING +
or - to select the station you want. Each time you press
the buttons, the preset numbers change as follows;
► Al ’► A2«
► AO «
► CO-
► B1 •
-C2-
► B2-
► BO-
►CU
12