Note – Sony KP-61XBR300 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting a DBS (Direct
Broadcast Satellite) Receiver
and VCR
1
t'onncii llu’ fable iVom the
the salellitc roeeiver.
salellite anienna to
c. Auadi the coaxial cable iVom the incomiiis
cable contiectiott or anletitia to VHF/LIHF IN
on the VCR.
3
Using a coaxial cable, connect VHF/LIHF
OUT on the VCR to VHF7UHF on the
projection TV.
4
Using AUDIO and S VIDEO* cables, connect
AUDIO and S VIDEO OUT on the DBS
receiver to AUDIO and S VIDEO IN on the
VCR.
5
Using AUDIO and S VIDEO* cables, connect
AUDIO and S VIDEO OUT on the VCR to
AUDIO and S VIDEO IN on the projection TV
(White-AUDIO Left, Red-AUDIO Right).
* If your VCR or DBS receiver is not equipped
with S VIDEO, use a VIDEO cable (yellow)
instead of the S VIDEO cable.
Note:
• To view input from the DBS or VCR, select the
video input which your DBS receiver or VCR is
connected to by pressing TV/VIDEO on the remote
control.
12
Disconnect all power sources before making any connections.
(Rear of projection TV)
S
VIDEO