Sony KP-61XBR300 - Manual (Page 25)

Setting Up the
Projection TV
Automatically
The AllTO SET IIP feature will allow you to set
the oil-screen language amt set all receix able
channels. The AUTO SET UP screen will appear
every time you turn on the projection TV until you
perform AUTO PROGRAM.
The AUTO SET UP feanire does nor apply for
installations that use a cable box for all channel
selection.
Yon can also set up the projection T\' manually, (see
"Using the CHANNEL SET UP Menu" on page 36)
Notes:
• Perform this function during the day. with the
antenna and/or cable properly connected, to
ensure that all available channels will be
broadcasting and receivable.
• Before you perform AUTO SET UP again, make
sure that the input from ANT (not AUX) is
selected by pressing ANT until “AUX” does not
appear next to the channel number.
• When you perform AUTO PROGRAM, your
CHANNEL FIX and ON/OFF TIMER settings
will be erased.
• When you perform AUTO PROGRAM, all the
settings in the VIDEO and AUDIO menus are
reset to the factory settings.
Using the buttons on the front panel and inside the
drop-down panel on the proicction T\ : The sereen will chance to rcllect vour choice.
1 Press POWER to turn on the projection TV.
POWER
à
2 Press SET UP inside the drop-down panel.
The AUTO SET UP screen appears.
ENGLISH (CH.)
ESPAÑOL . ICH-]
FRANÇAIS [VOL >I
AUTO SET UP : 1VOL-]
First please canned
the antenna.
Press I SET UP to exit.
3 Press CHANNEL -i- to select English,
CHANNEL - to select Spanish or VOLUME +
to select French.
- lOLLIME , -CHANNEL 4
QQ
ENGLISH (CM . I
LSPANOL [CM - '
FRANÇAIS i v O l .I
AUTO SET UP [VOL.I
First please conned
the antenna
Press I SET UP I 0 exit
4 Press VOLUME - to continue.
CONTINUE TO
AUTO PROGRAM’
YES:[CH f;
NO iCH -
0}
CO
I
5 Press CHANNEL -i- to preset channels
automaticallv.
Ò
“AUTO PROGRAM" appears and the
projection TV starts scanning and presetting
channels automatically. While scanning, the
received channel will be displayed on the sub
screen. When all the receivable channels are
stored, the lowest numbered channel will be
displayed. If the projection TV receives cable
TV channels, CABLE is set to ON
automatically.
(continued)
21