Sony KP-61XBR300 - Manual (Page 41)

1 Move the ¡o> slii'k up or rlow ii lo sclccl Ilic
desired clianiiel. '»'on ean \ iew die eluinnel tliat
is seleeled with the CHANNHL SKIP iiieiui in
the eenler sub screen, 'ton ean also use CH +/-
or O-d and ENTER buttons.
2 Press .
3 Move the joystick up or dow n to select YES.
and press yt'.
The selected channel will be erased.
If you want to re-enter the skipped channel, follow
the steps above and select NO.
CHANNEL CAPTION
~ Easy recognition of the channel you are
Pitching,
You can add a caption for
up to 32 channels of both
VHF/UHF and AUX
inputs.
With the CHANNEL
CAPTION window open:
1 Press 0 and then move the joystick up or
down to select the desired channel. You can
view the channel that is selected with the
CHANNEL CAPTION menu in the center sub
screen,
2 Press 0.
3 Move the joystick up or down to display the
first letter or number of the caption and press
0
to select it.
4 Repeat until up to four digits are selected.
5 Press 0.
To erase a caption, press RESET.
CHANNEL CAPTION
Move-v Select» Exit
CABLE
— Cable system setting
Select ON if your projection TV is conttected to a
cable system.
Select OFF if your projection TV is connected to
an atitenna.
AUTO SET UP will set CABLE to OFF
autotnatically if a cable channel is not available.
AUTO PROGRAM
—Automatic channel presetting
Select YES to signal the projection TV to
automatically program all receivable TV channels.
When all the receivable channels are stored, the
lowest numbered channel is displayed.
Select NO to cancel AUTO PROGRAM.
FAVORITE CHANNEL
—
User’s favorite channels
The FAVORITE CHANNEL feature enables easy
access to the eight channels that you preset (or the
last channel that you were watching).
(for details on how to set up this feature, see
“Setting and Selecting FAVORITE CHANNEL”
on page 38)
CHANNEL RX
— Locks selection of your projection TV’s
Input when use^ In conjunction with
external equipment such as a cable box, AV
receiver, etc.
2 - 6 :
When the cable box is connected to the VHF/UHF
input, you can fix the TV's input to one of the
channels between 2 and 6. Press DBS/CABLE
(FUNCTION) and then CH -i-/- to change the
cable box channels.
AUX 2-6:
Use this when a cable box is connected to AUX,
and a cable or antenna is connected to VHF/UHF.
VIDEO 1:
Use this when you have connected external video
equipment (e.g. AV receiver) and you want the
projection TV's input fixed to it.
OFF:
When you want to switch CHANNEL FIX off.
If the projection TV is in the AUX mode when you
turn CHANNEL FIX off, press ANT to return to
UHF input mode.
TIMER sellings are erased when CHANNEL FIX is
set. (If 2-6 or AUX2-6 is selected, timer settings for
those channels are not erased)
Note:
• You cannot change channels with the TV’s tuner
when you set CHANNEL FIX. If you want to use
the TV’s tuner while fixing the TV’s input to
VIDEO I, use the SET UP menu to set SELECT
OUT to TV OUT. (see “SELECT OUT” on page
40)
(continued)
C
(A
(Q
?
C
CO
rn
I
3
c
37