Sony KP-61XBR300 - Manual (Page 59)

Additional Information
TVoubleshooting
If, after reading the following
instructions, you have additional
questions related to the use of your Sony
projection TV, please call one of the
following numbers (English only).
Customers in the continental United States
contact the Direct Response Center at:
1-800-222-SONY (7669)
Customers in Canada contact the
Customer Relations Center at:
(416) 499-SONY (7669)
cS^lhims^ndlheTIMEtV I
D BYJi>dlcator on the front
X8e{ij[^lagQMisJtinctipnJ ,
The projection TV is equipped with a self-
diagnosis function. If there is a problem with your
projection TV, the TIMER/STAND BY indicator
on the front panel will flash repeatedly. Counting
the number of flashes helps you inform qualified
Sony personnel of the projection TV’s condition.
1 CvHim how many umes the TIMHR/S I'AND BY
indiealtir (lasltes in total. It flashes l\\ ice at
seconds' intervals. If. for example, the indicator
flashes twice, slops flashing for 3 seconds, and
flashes twice again, that counts as t\\ ice.
2 Press POWER on the projection TV to turn it
off. then inform qualified Sony personnel or the
above Direct Response Center of the number of
flashes.
No picture (screen not lit), no stwnd
♦ Make sure the power cord is plugged in.
♦ Operate with the buttons on both the projection TV
and the remote control.
♦ Check to see if the TV/VIDEO setting is correct:
when watching TV, set to TV, and when watching
video tapes, set to VIDEO 1, 2, 3, 4 or 5.
♦ Try another channel. // could be slation trouble.
*■ Perform AUTO SET UP again using the SET UP
button to return to the factory preset condition, (see
“To perform AUTO SET UP again” on page 22)
♦ The PARENTAL CONTROL feature is activated,
(see “Using the PARENTAL CONTROL Feature”
on page 42)
Batteries could be weak. Replace the batteries.
Press TV (FUNCTION) when operating your
projection TV.
Make sure the projection TV’s power cord is
connected securely to the wall outlet.
Locate the projection TV at least 3-4 feet away
from fluorescent lights.
Dark, poor or no picture (screen lit),
good sound
♦ .Adjust PICTflRE in the VIDEO menu, (see
“PiCTllRE" on page 32)
♦ Adjust BRIGHTNESS in the VIDEO menu, (sec
"BRIGHTNESS" on page 32)
♦ Check antenna/cahle connections.
♦ Perform ALITO SET UP again using the SET UP
button to return to the factory preset condition, (see
“To perform AUTO SET UP again” on page 22)
♦ Adjust the convergence again using the FLASH
FOCUS button, (see “Adjusting the Convergence
Automatically (FLASH FOCUS)” on page 22)
Good picture, no sound ' .
♦ Press MUTING so that “MUTING” disappears
from the screen, (see “MUTING” on page 23)
♦ Check the MTS setting in the AUDIO menu, (see
“MTS” on page 33)
♦ Make sure SPEAKER is set to ALL ON or L/R
OFF in the AUDIO menu, (see “SPEAKER” on
page 34)
♦ Perform AUTO SET UP again using the SET UP
button to return to the factory preset condition, (see
“To perform AUTO SET UP again” on page 22).
(continued)
|:
o’
o
o
o
ft)
o’
0
Check the polarity of the batteries.
55