Camera recording, To stop recording momentarily [a, To finish recording [b – Sony CCD-TRV41 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Camera recording
Make sure that the power source is installed and a cassette is inserted and that the
START/STOP MODE switch inside the LCD panel is set to A ■ Before you record one
time events, you may want to make a trial recording to make sure that the camcorder is
working correctly.
When you use the camcorder for the first time, power on it and reset the date and time
to your time before you start recording (p. 62). The date is automatically recorded for 10
seconds after you start recording
(AUTO DATE feature)
(CCD-TRV41 only). This
feature works only once a day.
(
1
) While pressing the small green button on the POWER switch, set it to
CAMERA.
(2) Turn STANDBY up.
(3) Press START/STOP. The camcorder starts recording. The "REC" indicator
appears and the red lamp lights up in the viewfinder. The camera recording/
battery lamp located on the front of the camcorder also lights up.
You can also select Recording mode,_ SP (standard play) mode or LP (long play) mode.
Set REC MODE in the menu system according to the length of your planned recording
before you start.
STBY
0
:
00:00
40 min i
To stop recording momentarily [a]
Press START/STOP again. The "STBY" indicator appears in the viewfinder
(Standby
mode).
[a]
lO
To finish recording [b]
Press START/STOP again. Turn STANDBY down and set the POWER switch to OFF.
Then, eject the cassette and remove the battery pack.
[b]