Notes on writing the rc time code, Note on indicator – Sony CCD-TRV41 User Manual
Page 57
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Notes on writing the
RC
time code
• The RC time code writing stops when:
- you press TIME CODE WRITE again before starting playback.
- you press INDEX before starting playback.
- you change from playback mode to another mode.
• When you are writing the RC time code from the middle of a tape without the time
code written, writing starts several frames before fhe currenf picture.
• If you write the RC time code on a recorded tape, the Data Code is erased.
• Though you can mark the RC time code on a tape recorded both in LP mode and SP
mode, the RC time code written in LP mode may not be read correctly.
• You cannot mark the RC time code on a tape with the red mark on the cassette
exposed.
• A black band appears when you mark the RC time code during playback, and the
sound cannot be heard. This does not affect the picture and sound that are already
recorded.
Note on
indicator
The
indicator appears during playback if:
• nothing is recorded.
• the RC time code is unreadable because of the damage of the tape or because of the
noise.
• you recorded using another VCR without RC time code function.
The
indicator may also appear on the LCD screen during variable speed
playback.